I am frequently asked
about how to properly remove wallpaper coverings. Patience and primer: the two
most important words in installing wallpaper coverings. Many times we are asked
to repair and Spackle damaged walls done by rookie painters who lost their
patience during the job or because the walls weren't primed before the paper
went up.
Homeowners can save
substantial money removing wall coverings themselves, but it does take time and
effort to do the job right. But please note, that it is always more cost
and time efficient to hire the professionals to remove wallpaper coverings. It
is extremely easy to miss a step in the eight step wallpaper removal process,
which can quickly turn into a messy and costly situation. Hiring the
professionals such as Ricagno Painting Service can avoid any unnecessary damage
to your walls and can ensure all of the glue is removed from the walls before
painting.
Quick Step-by-Step Wallpaper Guide:
Step 1: Buy DIF wallpaper stripper concentrate solution, available at
home improvement centers and paint stores. DIF contains enzymes that break down
the glue behind the wallpaper. Additionally, you will need a garden sprayer, a
4-or 6- inch putty knife, a spackling pan, a step ladder and hot water.
Step 2: Cover the floors with tarp or plastic sheeting; things are going
to get wet and messy. Ricagno uses
rubberized drop cloths with cardboard on top. Keep outlet covers on during the
wettest part of the process to avoid shorting out your electrical circuits (or
turn off electricity to the room).
Step 3: To make mix for a 2.5 gallon garden sprayer, uses 24 ounces of
DIF and fill the rest of the container with hot water.
Step 4: Work on one wall at a time in eight-to-10-foot sections. Using
the garden sprayer, heavily soak the area. Let it sit for 15 minutes, then
repeat spraying. Try pulling the paper off by hand. If needed, use the putty
knife to scrape as you peel.
Step 5: While peeling, keep spraying the paper underneath. Make sure not
to let the section you are working on dry out; it will become harder to remove
if dry.
Step 6: To remove the brown paper backing that sometimes remains, spray
it, then start working with the putty knife. Wipe the glue goo off into a
spackle blade pan as you work.
Step 7: When all the paper is removed, wipe down the wall again; this
time, with only clear hot water to remove any remaining glue residue. Let the
walls dry completely.
Step 8: To prep for painting, Karen Ricagno recommends priming walls
with oil primer, instead of latex, because it seals better and prevents future
problems from undetected glue residue, which will crack the new paint finish.
